Control panel overview

Graphic
1.
LCD (liquid crystal display)
Displays messages on the screen to help you set up and use your machine.
Also, you can adjust the angle of the LCD display by lifting it.
2.
Number of Copies
Use this key to make multiple copies.
3.
Menu keys:
• 
Bsymbol.ltri or Bsymbol.rtri
Press to scroll backward or forward to a menu selection.
• 
Bsymbol.utri or Bsymbol.dtri
Press to scroll through the menus and options.
• 
Menu
Lets you access the main menu.
• 
OK
Lets you select a setting.
4.
Start keys:
• 
Graphic Colour Start
Lets you start making copies in full colour. Also lets you start a scanning operation (in colour or mono, depending on the scanning setting in the ControlCenter software).
• 
Graphic Mono Start
Lets you start making copies in monochrome. Also lets you start a scanning operation (in colour or mono, depending on the scanning setting in the ControlCenter software).
 
5.
Graphic Stop/Exit
Stops an operation or exits from a menu.
6.
On/Off
You can turn the machine on or off.
If you turn the machine off, it will still periodically clean the print head to maintain print quality.
7.
Ink Management
Lets you clean the print head, check the print quality, and check the available ink volume.
8.
Graphic Scan
Lets you access Scan mode.
9.
Graphic PhotoCapture
Lets you access PhotoCapture Center™ mode.
10.
Warning LED
Turns red when the LCD displays an error or an important status message.

Warning LED indications

The status LED (Light Emitting Diode) is a light that shows the DCP status.The LCD shows the current machine status when the machine is idle.
Screen
LED
DCP status
Description
Graphic
Off
Ready
The DCP is ready for use.
Graphic
Red
Cover open
The cover is open. Close the cover. (See Error messages.)
Ink empty
Replace the Ink cartridge with a new one. (See Replacing the ink cartridges.)
Paper error
Put paper in the tray or clear the paper jam. Check the LCD message. (See Error messages.)
Other messages
Check the LCD message. (See Error messages.)